Sony BKM-16R (BKM16) Monitor Control Unit MCU for BVM-L and A Series Monitors

Monitor Control Unit (MCU) for BVM-L Series monitors and BVM-A Series monitors

General

Power requirements
DC IN: 5 V, 1.1 A (supplied by the connected monitor) DC IN: 12 V, 0.5A (supplied by the connected AC adaptor) AC IN: 100 V to 240 V, 50/60 Hz DC OUT: 12 V, 3 A

Current consumption
5 V DC, 1.1 A/12 V DC, 0.5 A

Power consumption
Approx. 6 W

Dimensions (W x H x D)
424.0 X 58.8 X 174.9 (mm) 16 3/4 X 2 3/8 X 7 (inch)

Mass
Approx. 2.1 kg (4 lb 10 oz)

Operating Conditions

Operating temperature
0 to 35 °C (32°F to 95°F)

Optimum temperature
20 to 30 °C (68°F to 86°F)

Humidity
0 to 90 % (no condensation)

Pressure
700 hPa to 1060 hPa

Storage and Transport Conditions

Temperature
-10°C to +40°C (14°F to 104°F)

Humidity
0 % to 90 %

Pressure
700 hPa to 1060 hPa

Input/Output

LAN
Ethernet (10 BASE-T/100 BASE-TX) connector RJ-45 x1

DC 5V/12V IN
Circle 4-pin DC Connector (male x 1)

New Modular Monitor Control Unit
The control unit for the BVM-L Series monitor. It also can control the BVM-A Series monitors. This Monitor Control Unit can be attached below the BVM-L Series monitor using the optional Controller Attachment Stand, the BKM-37H, or connected remotely via an Ethernet cable.

Same Operational Convenience as the BVM-CRT series
SCAN, H/V Delay, MONO, APT, COMB, CHAR OFF, COL TEMP, 16:9, NATIVE SCAN, BLUE ONLY, RGB OFF, MARKER, CHROMA UP, MANUAL Adjustment

19-inch EIA standard 19-inch rack mountable
The rack mount brackets and screws are supplied.