- Description
- Features
The K6 powering module is the heart of this Sennheiser professional
modular microphone system and can be powered either by its internal
'AA' size 1.5 V battery or by 12 - 48 V phantom power. The K6 can be
combined with different condenser microphone heads to provide a wide
variety of polar patterns. Matt
black, anodised scratch-resistant finish.
| Features | ||
 |
Switchable bass roll-off filter protects against rumble, handling, pop and wind noise | |
|
On/off switch with battery test | |
|
High output, low noise | |
|
Transformerless balanced output on 3-pin XLR connector | |
| Delivery Includes | ||
|
1 K6 powering module | |
|
1 MZQ 200 microphone clamp | |
|
1 AA battery | |
|
1 protective carrying case | |
| Technical Data | |||
|
Nominal impedance |  |
200 Ohm |
|
Min. terminating impedance | |
1000 Ohm |
|
Output voltage | |
2 V |
|
Power supply | |
Phantom 12 - 48 V 1x Typ IEC LR 06 |
|
Current consumption | |
2,2 mA |
|
Operating time (Battery) | |
max. 150 h |
|
Dimensions | |
d 22 x 94 mm (netto) |
|
Weight | |
ca. 45 g |
|
Gain | |
0 dB |
|
| Profile |
| Powering
module for battery/phantom powering with switchable roll-off filter,
battery on/off switch with battery test. Suitable for ME 62 - ME 67
microphone heads and -60 versions of MKE microphones. Transmission factor 0 dB at 1 kHz, nominal impedance 200 Ohm, min. terminating impedance 1 kOhm, max. output voltage 2 V (at 1 kHz), power supply: phantom powering 12 - 48 V or 1.5 V (AA size) alkaline battery, supply current 2.2 mA, battery life approx. 150 h, dimensions in mm: Ø 22 x 155, resultant length 94 mm, weight approx. 45 g. |
| Glossary | |
|
Nominal impedance |
| See impedance. | |
|
|
|
Min. terminating impedance |
| Impedance at which the connected unit meets the specified technical data. If the unit is connected to a lower impedance, it will usually have a lower output voltage or a greater distortion. | |
|
|
|
Output voltage |
| The (signal) voltage which a unit supplies at its output. | |
|
|
|
Power supply |
| Description of the power source used for powering a unit, for example mains, battery, rechargeable accupack, etc. | |
|
|
|
Current consumption |
|
|
|
Operating time (Battery) |
| Indicates the operating time with a new, fully charged battery. | |
|
|
|
Dimensions |
|
|
|
Weight |
|
|
|
Gain |
| Ratio of input voltage to output voltage. A negative value means an attenuation. | |
|
|
| Recommended Accessories | |||
|
Description | Product | Article No. |
|
Clip-on microphone w/o accessories | MKE 2-60 GOLD-C | 04733 |
|
|
The MKE 2-60 GOLD-C is a high-quality, sub-miniature clip-on lavalier microphone which is suitable for both speech and instrument miking applications in all areas of live work. It fulfils the most stringent demands on sound quality and is extremely rugged. A special Umbrella Diaphragm? and a welded housing protect the MKE 2-60 GOLD-C against sweat and moisture, making it an ideal choice for theatrical productions. Colour: matt black. | ||
|
|||
|
Camera adapter | MZQ 6 | 03288 |
|
|
Microphone clamp with integral flashmount adaptor for secure attachment of K6/K6P powering modules to the flashmount of video cameras. Thread: 1/4". Colour: black. | ||
|
|||
|
Rycote | Windshield 4 Kit | 086001 |
|
|
Comprising: medium modular suspension, windshield 4 and windjammer 4 in its own box | ||
|
|||
|
Microphone head for K6/K6P (omni-directional) | ME 62 | 03281 |
|
|
The ME 62 is an omni-directional microphone head suitable for K6 and K6P powering modules. It can be used for reporting, discussions and interviews. The ME 62 is particularly suitable for good reproduction of 'room' ambience and 'spaced omni' stereo recording. Matt black, anodised, scratch-resistant finish. | ||
|
|||
|
Microphone head for K6/K6P (cardioid) | ME 64 | 03282 |
|
|
The ME 64 is a cardioid microphone head designed for use with the K6 and K6P powering modules. It has a very wide range of applications including reporting, interviews, dubbing, live sound reinforcement and recording applications. Matt black, anodised, scratch-resistant finish. | ||
|
|||
|
Microphone head for K6/K6P (super-cardioid) | ME 65 | 03283 |
|
|
The ME 65 is a super-cardioid microphone head designed for use with the K6 and K6P powering modules. It is especially suited to vocal and speech applications. Matt black, anodised, scratch-resistant finish. | ||
|
|||
|
Microphone head for K6/K6P (super-cardioid/lobar) | ME 66 | 03284 |
|
|
The
ME 66 is a short gun microphone head designed for use with the K6 and
K6P powering modules. It is especially suitable for reporting, film and
broadcast location applications and for picking up quiet signals in
noisy or acoustically live environments as it discriminates against
sound not emanating from the main pick-up direction. Matt black, anodised, scratch-resistant finish. |
||
|
|||
|
Microphone head for K6/K6P (lobar, long gun) | ME 67 | 03285 |
|
|
The ME 67 is a long gun microphone head designed for use with the K6 and K6P powering modules. A highly directional microphone, it can be used where the microphone must be placed at a distance from the sound source. Matt black, anodised, scratch-resistant finish. | ||
|
|||
| Variant | ||
|
Product | Article No. |
| Review this product |
| Type of review * | Please select ... Personal Published | ||||||||||||||||||||
| Name of publisher * | |||||||||||||||||||||
| Comments on product * | |||||||||||||||||||||
| Link (if published) | |||||||||||||||||||||
| Contact name * | |||||||||||||||||||||
| Email * | |||||||||||||||||||||
| Rating * |
|
||||||||||||||||||||
| Please tick this box to agree for your content to be published. Please note, we may not publish all reviews sent to us. |
|
 |
|
 |
|
|
|
|